Silk PLA+ color update
Pink Silk PLA+ Filament Winding for OEM Custom Color Review
This 36-second factory video shows glossy pink filament passing through a guide and winding onto a black spool, followed by a view of stacked black spools with visible PLA+ labels. A bright reflective band moves across the wound surface as the viewing position changes. WJ identifies the material as silk PLA+ and states that OEM custom colors are supported; the footage does not establish color measurements, dimensional tolerance or production capacity.
Quick answer for buyers
WJ presents glossy pink silk PLA+ filament, identified by WJ and shown winding onto a black spool. WJ states that OEM custom colors are available; buyers can send a color reference and confirm filament, spool, label and carton requirements, then request a physical sample before approving a bulk order.
What the pink filament winding video shows
The opening and closing views stay close to one winding station. Glossy pink filament runs through a guide and builds across the visible section of a black spool. A mid-video view shows stacked black spools, including labels marked PLA+.
A bright reflective band is visible on the wound material and shifts with the camera and spool position. The video does not establish filament diameter tolerance, spool net weight, measured color values or output capacity.
Reviewing a silk finish under practical lighting
A silk surface can appear brighter, darker or more reflective when the light source and viewing angle change. Screen images are useful for choosing a direction, but they are not a substitute for approving a physical color sample under the lighting relevant to the final product.
For repeat orders, record the approved sample or color reference, the viewing conditions used for approval and any acceptable variation agreed with the supplier.
Planning an OEM custom color filament order
WJ states that this is silk PLA+ filament and that OEM custom colors are supported. Buyers should provide a target color reference and intended appearance, then separately confirm filament diameter, dimensional criteria, spool net weight and spool dimensions.
Private-label requirements should also list label files, carton artwork and protective packaging. Approve the physical sample and written specification before bulk production so the custom color filament and packaging are reviewed against the same order reference.
Production overview
WJ 3D Printer Filament Factory shares a close view of pink silk PLA+ filament winding at a factory station. Use the video as visible process evidence, then send your color reference and order specification to request an OEM quotation and sample.
Procurement notes
| Color approval | Send a physical sample, color code or other agreed reference and review the silk appearance under relevant lighting. |
|---|---|
| Filament specification | Confirm PLA+ grade, filament diameter, dimensional criteria and intended printing application. |
| Spool and packaging | State net weight, spool dimensions, label files, carton artwork and protective packaging requirements. |
| Order release | Agree the approved sample, quantity, inspection criteria and delivery timing before bulk production. |