Silk PLA+ color showcase
Copper Silk PLA+ Filament: Color and Printed Finish Showcase
This 54-second video shows a copper-colored sculpted print and matching-looking filament on a black spool. WJ identifies the material as copper silk PLA+. Hand-held views reveal the print’s curved top, fluted lower section and changing reflections, followed by close views of the filament.
Quick answer for buyers
WJ presents a copper-colored printed sample and filament spool, identifying the material as copper silk PLA+. Buyers can review the visible color direction and silk reflections. Ask WJ to confirm color, spool, label and packaging options; send a color reference, diameter, quantity and destination for physical sample approval and an OEM quote.
What the copper silk PLA+ video shows
A hand turns a sculpted print with a curved upper section and a fluted lower section. Reflections move across the ridges and curves, while close views also reveal print layers. The clip then shows copper-colored filament on a black spool.
The copper silk PLA+ identification comes from WJ. The visible evidence supports an appearance review; it does not measure color, gloss, mechanical strength or metal content. “Copper” describes the color here, not a verified copper-filled or conductive formulation.
Approve copper tone and silk reflections together
Compare a physical spool and printed sample under agreed lighting and from several viewing angles. Keep an accepted printed master alongside the color reference so that both the copper shade and the reflected finish can be reviewed.
For a practical comparison, use the same model and record the printer, nozzle, temperature, speed and layer height. This is a suggested buyer approval method; the video does not establish a validated print profile or a numerical gloss result.
Prepare an OEM or wholesale copper filament order
Send WJ your target copper shade, intended decorative application and printed-sample requirements. Confirm the exact PLA+ grade, filament diameter, net weight and spool dimensions before approving the order.
Discuss available spool, label and protective packaging options, then agree quantity, acceptance criteria and delivery timing. Retain the approved printed master and packaging artwork for repeat orders.
Procurement notes
| Color and surface | Approve a physical copper filament spool and printed master under consistent lighting. |
|---|---|
| Material and dimensions | Confirm PLA+ grade, diameter and acceptance criteria; request separate evidence for any functional requirement. |
| Spool and packaging | Specify net weight, spool dimensions, label, protective packing and carton. |
| Sample and quotation | Send color reference, quantity, destination and requested delivery date. |